Home > Focusers > Motors & Controllers >
Lunatico Astro Seletek Limpet Controller

Lunatico Astro Seletek Limpet Controller

Starting Price: $229.00
Price as Configured: $229.00
Brand: Lunatico Astro / SKU: LA-ACNSEL05
Seletek LIMPET, the smallest and most recent Seletek-ASCOM, INDIGO and INDILib compliant. With a small 12V battery and the wifi interface, no cables coming out of the telescope!
Recommended Add-ons and Accessories
Product Price Quantity
LA-ACASEL23-2 - Lunatico Astro Cable for ZeroDew Bands with Seletek
LA-ACASEL23-2 - Lunatico Astro Cable for ZeroDew Bands with Seletek
About This Product
Controlling your Zerodew bands with the Seletek controllers and the PinByPin program (Armadillo, Limpet)

Technical characteristics:
  • Cable length: 2 m
  • With two RCA outputs and one DB9 input – Specify your controller model (**)
  • Valid for two bands simultaneously (Very important! Do not exceed 1A continuous output power, and 2A peak (< 1 sec)
$28.00 each
LA-ACASEL06 - Lunatico Astro Temperature Sensor for Seletek, DB-9
LA-ACASEL06 - Lunatico Astro Temperature Sensor for Seletek, DB-9
About This Product
The external temperature sensor increases the accuracy of the temperature measurement made by the Seletek controller * (Original, Armadillo, Platypus, Limpet or Tarsier), as the sensing head can be placed directly on the OTA.

This sensor has to be installed in the MAIN PORT of the device.

Available in two options:

attached to DB9 motor cable
attached to double DB9 connector
(*) Check the label on your controller to determine the model to select.
$36.00 each
LA-ACASEL07 - Lunatico Astro Temperature Sensor for Seletek, Motor Connection Cable
LA-ACASEL07 - Lunatico Astro Temperature Sensor for Seletek, Motor Connection Cable
About This Product
The external temperature sensor increases the accuracy of the temperature measurement made by the Seletek controller * (Original, Armadillo, Platypus, Limpet or Tarsier), as the sensing head can be placed directly on the OTA.

This sensor has to be installed in the MAIN PORT of the device.

Available in two options:

attached to DB9 motor cable
attached to double DB9 connector
(*) Check the label on your controller to determine the model to select.
$37.00 each
QTY:  
Price as Configured: $229.00

Product Help
Need help deciding?
Tell us what you're looking for, and we’ll point you in the right direction. .
The Limpet focuser controller works from:
    • any astronomy program (ASCOM and INDILib drivers available)
    • your smartphone
    • your computer’s web browser
  • can alternatively control a camera rotator (with our Lunatico's software and ASCOM)
  • very small enclosure
  • central hole to easily attach the Limpet to the telescope using a single screw
  • Wifi and USB connection
  • Very low power requirements (30mA idle connected to wifi, 530mA focusing with the standard motor)
  • Optional external wifi antenna needed if the wifi signal is weak – if the wifi access point is in the observatory it won’t be necessary
  • Optional external temperature sensor
  • The Seletek Platypus and Armadillo will work with it--just one device at any time.
  • Including a screw locking 2.1x 5.5mm jack for safe attachment of power cable
  • 5.5 / 2.1mm standard jack, center positive, 12V dc (13.8V, as supplied by some batteries, is valid)
  • ASCOM, INDIGO and INDILib enabled
  • focus from your smartphone via web interface
With the Limpet you can:
  • Control one focus motor
  • Control one rotator motor
  • Use Lunatico's free program PinByPin for independent control of any controller pin, manual or automated (depending on temperature delta), useful not only for fan control but also for dew heater bands like the ZeroDew system.
  • Rotator control